Home View Products Place an order! Links Email

“We bring the world's products to your desk”

 

MATERIAL SAFETY DATA SHEET
Product Identification: "Stardust Super Absorbent™"
CAS Number: 93763-70-3
Product Description: Liquid/semi-liquid absorbent  
I. Manufacturer Identification
Manufacturer's Name: Paradigm International, Inc.
Address: 17161 Gillette, Irving, CA 92614-1414
Emergency Telephone Number: (949) 660-1414
Telephone Number for Information: (949) 660-1414
(Above numbers active between 8 AM and 5 PM PST)
Date Prepared: 6/1/96
II. Ingredients/Identity Information
Hazardous Components: None
Ingredient Name: Expanded amorphous Alumina Silicate

ACGIH TLV-TWA
10mg/M3
OSHA PEL-TWA 15mg/M3 Total Particulate
5mg/M3 Respirable Fraction
III. Physical/Chemical Characteristics
Boiling Point: Solid
Vapor Pressure: (mm Hg.): Solid
Vapor Density: (AIR=1): Solid
Solubility in Water: Insoluble in water & most acids
Specific Gravity:(H2O=1): .08-.20
Melting Point: 2,000° F
Evaporation Rate: (Butyl Acetate=1): Nil
Appearance and Odor: Dry white powder, no odor
IV. Fire and Explosion Hazard Data

Flash Point: None
Flammable Limits: Nonflammable LEL: None UEL: None
Extinguishing Media: None required if product unused. If used to collect flammable liquids, then consult MSDS(s) of flammable liquid collected.
Special Fire Fighting Procedures:
None required if product unused. If used to collect flammable liquids, then consult MSDS(s) of flammable liquid collected.
Unusual Fire and Explosion Hazards: None required if product unused. If used to collect flammable liquids, then consult MSDS(s) of flammable liquid collected.

V. Reactivity Data
Stability:Unstable: Stable:
Conditions to avoid: Hydrofluoric Acid
Hazardous Decomposition or Byproducts: None
Hazardous Polymerization: Will not occur
VI. Health Hazard Data
Route(s) of Entry:Inhalation: Skin: Ingestion:
Health Hazards (Acute and Chronic: Innocuous dust, overexposure may cause coughing and sneezing.
Medical Conditions Generally Aggravated by Exposure: Persons sensitive to inert dust may experience coughing when exposed to heavy concentrations of airborne material.
Emergency and First Aid Procedures: Breath fresh air. If dust lodges in eyes, use standard eye wash solutions or water. If irritation persists, consult with a physician.
VII. Precautions for Safe Handling & Use
Steps to be Taken in Case Material is Released or Spilled: Sweep up with broom. Dispose of as with any inert, non-carcinogenic solid waste.
Waste Disposal Method: If product unused, then no special disposal procedure necessary. After product has been used to collect liquid materials, dispose in compliance with MSDS(s) of the liquid collected.
Precautions to be Taken in Handling and Storing: Avoid emptying bags in windy areas.
Other Precautions: None in unused form. After product has been used to collect liquid materials, consult MSDS(s) of the liquid collected.
VIII. Control Measures
Respiratory Protection: That which is suitable for inert, non-carcinogenic dusts: MSA Dustfoe 77 or equivalent.
Ventilation: Local Exhaust: Apply negative pressure air at dump stations to entrain airborne dust.
Mechanical: Easily transported pneumatically.
Special: NAOther: NA
Protective Gloves: Not necessary
Eye Protection: Goggles recommended for non-ventilated areas
Other Protective Clothing or Equipment: Not necessary
Work/Hygienic Practices: Normal good housekeeping

Note: NA = Not Applicable


The information on this Data Sheet represents our current data and best opinion as to the proper use in handling of this material under normal conditions. Any use of this material which is not in conformance with this Data Sheet or which involves using the material in combination with any other material or any other process is the responsibility of the user.

Copyright© 2001, Commonwealth Industries. All Rights Reserved.